There are multiple occasions when you will feel you should be able to handle repair jobs at home instead of calling for external help. A leaking pipe or a clogged shower cabin can be managed if you have the right tools and have some idea of how to go about it. You end up saving a few pounds, but more than that, you have that proud satisfaction of having done a job. It’s never too late to catch up on some knowledge and here are some frequently asked questions related to plumbing jobs you can handle at home.
How to Fix a Leaking/Dripping Tap?
It is not uncommon to find the tap in your faucet dripping even after you have closed the tap. The reason for the water dripping could be a washer or O-ring gone bust. You will have to replace it. Gather the tools you will need to attend to the job. These include an adjustable spanner, new washer or O-ring, and a pair of scissors. The easy way to stop this dripping is to follow these steps:
- Turn the water supply to the tap off (this may involve shutting the valve below the faucet).
- Allow the water to flow away
- Remove any decorative fittings your tap has
- Try to unscrew the faucet handle with your hands; a little tap at the nut portion will loosen it
- Now use the spanner to remove the stem by unscrewing the nut
- You can now disassemble the fitting and spread them on the top
- Check if the washer appears torn
- You can carefully place the new washer in its place and reassemble the whole thing
- If you find nothing wrong with the washer, check the O-ring
These activities don’t consume much time. You can put the tap back, open the valve, and check if the dripping has stopped. In most cases, it should.
Handling a similar job on a mixer tap may not be that simple. There you won’t find the washers, but there will be ceramic discs. These are inside the cartridges. You have to replace the whole cartridge in case of damage to the discs. You might have to open it out to find the details of the cartridge and buy the exact replacement. You can leave the tap as it is if you can manage without using it till you can do the repair job.
Remember, if you don’t succeed with these attempts, you will have to call in a professional plumber. Certain jobs like the gutters and radiators can only be handled by the expert. They may be beyond your scope as a DIY activity.
How to Fix a Clogged Drain?
Another frequently reported issue is the drain in your shower getting choked and the water accumulating below your feet. Though you may have the drain cover, stuff like hair can pass through and over time grow large enough inside the drainpipe to block it. You may not need to call a plumber to handle it. There are several methods suggested by experts to unclog a shower drain. Let’s take a look at a few of them.
- The simplest one is to boil some water and pour it through the drain cover and wait for it to go down and do its job. In many such cases, the water may be draining very slowly. You must, therefore, pour the hot water before you use the shower.
- The boiling water trick may not work many times. You will find certain chemicals being sold in the market to clear drains. These may be effective; however, experts advise against it since the chemicals can damage the plastic material in the pipelines. The alternate home solution offered is to use a combination of vinegar and baking soda. Here, the baking soda is first sent down the drain, and after a while, vinegar is poured. You will have to leave it be for 2 hours. You will find the clogging issue solved.
- Using a Toilet Jack: The toilet jack or plumber’s snake is a thick flexible round wire with a hook-like end. Depending on the drainage style and structure, you can insert this jack into the drain after removing the drain cover in your shower or wherever you are facing the clogging issue. The jack’s hook will grip stuff like hair and you can wind the cable back and retrieve and remove the dirt. You can do it multiple times until you are sure there is no more blocking of the drain. You can even follow this method by pouring boiling water to clean up the leftover dirt in the drain.
- Using a Plunger: This is the traditional way of clearing the blockage in drains. The plunger has a rubber head, which will cover the drain’s mouth. A vacuum will be created within the drain. You have to push the wooden handle hard and this will create the vacuum. The pressure created by this will then clear of any substance blocking the flow of water through the drain. The wet and dry vacuum cleaner can also be used for the same job if you possess one.
Maintaining the House
As you go through these motions in trying to do some minor plumbing repair jobs, you will realize how critical it is for you to maintain your bathrooms and kitchen so that problems like leakage and clogging do not occur.
When you have to call in the plumber, one of your best companies in London is https://www.vividpropertycare.co.uk/. We do a perfect job at reasonable rates.